Fuel System Cleaning to Improve Performance in Arlington, Texas

All modern vehicles come with fuel injection systems, so it’s a topic we all need to know something about. All new cars and trucks sold in Arlington, Texas over the last 30 years or so have come with fuel injection systems.

The fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount, at the right time; to be mixed with air and burned in the engine.

So how many fuel injectors does your car have? There’s one for each cylinder. So four, six or eight for most folks in Arlington, Texas. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty sophisticated part.

Kwik Kar Arlington Auto Service Centers can help you with a fuel injector cleaning service. What’s the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. The fuel needs to be sprayed in a particular pattern as determined by the engine design.

Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn’t get burned as efficiently as it could. That robs performance and wastes fuel.

What about dirty fuel – how does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. Its real tempting to shop for bargains with fuel prices as high as they are, but major brands in the Arlington, Texas area have better detergents and additives and deliver consistent quality.

What about a good fuel filter? The fuel filter is the next device in the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it’s clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.

It’s important to replace the fuel filter when your manufacturer recommends it. That’s part of a comprehensive fuel system cleaning.

There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines we’re starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There’s no room for dirt and gum in a precision part like that.

There are a lot of good products available in Arlington, Texas that can clean fuel injectors. They’re best used to prevent fouling in the fuel injectors. Many can’t clean a seriously gummed up injector – that requires a professional deep cleaning. But putting the cleaner in the fuel tank after you’ve had Kwik Kar Arlington Auto Service Centers take a look at your fuel system will help keep it clean. Be sure to read the label for directions.

Give us a call if you think your sedan may be ready for a fuel injector cleaning.

Manager: Alison Dolezal
Kwik Kar Arlington Auto Service Centers
5333 Matlock Road & 4801 W. Sublett
Arlington, Texas Matlock @ 76018 & Sublett @ 76017
Matlock @ 817-468-0200 & Sublett @ 817-563-1956

Selecting New Tires and Wheels

Some of us just love tires. All those little rubber hairs on new tires and the smell is wonderful. We live in a great time for tires. No matter how you drive, where you want to go or the look you're after; there is a tire for you.

The same is true about wheels. The hardest part is choosing from the thousands of wheels available.

We may not be able to help with that, but we can help you get some things in mind before you consult with your Arlington tire professional. Let's start with function and think about how you drive.

For example, maybe you have a large SUV but you don't drive off-road, so an off-road tread isn't important. Also, because you are not out bouncing over rocks in the Texas backcountry, you don't need a high profile tire to protect your rims. So that means you can probably go with the low-wide look.

If you have a winter season with rain and snow or if you find you need better ice and snow performance, they make great, high-performance snow tires that won't make it look like you are driving a tractor.

There really are a lot of options for any given vehicle. You will find it very helpful to have a discussion like this with your Fort Worth tire pro when you need new tires. You can find the best solutions for your driving needs and to make improvements in ride or handling.

Picking a wheel that is the same size as what you are now running is pretty simple. But, it gets trickier if you want to upsize. Just get some help when you go bigger. All that tire and wheel still needs to fit in the available space. You do not want your tires to rub when you turn or hit a bump. You also need to make sure your brakes and suspension bits will fit with your wheel of choice. It doesn't matter how great your car looks if it's not drivable.

Taller, wider wheels and tires probably weigh more than your stock shoes. And it's "unsprung" weight - that has a big impact on brake performance. The upsized shoes increase rotational inertia - if you go too big you may need to upgrade your brakes to compensate.

Another possible problem is an inaccurate speedometer. This happens because the number of rotations can change with the new wheels. Fortunately, speedometers and odometers are all controlled by the engine computer; so it is simple to get it reprogrammed and compensate for the bigger tires.

No matter what you are after: low cost, long life, high performance, traction or stunning good looks, your wheel and tire professional at Kwik Kar Arlington Auto Service Centers in Arlington, Texas can help you identify your needs and give you a custom fit. With all the options available, you don't have to compromise. There is a tire out there with your name on it!

Risk of Extended Oil Change Intervals

Nothing in your engine workers harder than your oil. With hundreds of moving parts, and thousands of explosions every minute, it's no wonder that engine oil needs to be changed frequently!

You've probably heard the old rule of thumb: Change your oil every 3,000 miles/ 5,000 kilometers or 3 months, whichever comes first. But some car manufacturers have introduced extended oil change intervals. They figure that a modern vehicle driven under the right conditions can go for 5,000 miles/8000 kilometers or more between an oil change.

The key phrase here is "under the right conditions". If you look at your owner's manual, you'll see two different maintenance schedules: one for "normal" driving conditions and one for "Severe Service". Severe service driving conditions include stop and go, short trips, towing, hauling, hot, cold, and dusty driving. That's why at AutoNetTV we often refer you to the severe service schedule in your owners' manual, because, for most of us Texas car owners, that's the way we use our vehicles in everyday life.

Recently, four of the largest auto manufacturers in the world have extended engine warranty coverage for engine damage caused by oil sludge resulting from longer oil change intervals. They found that real-world conditions require more frequent oil changes than the 7,500mi/12,000 km interval they were recommending. They subsequently recommended more frequent oil change intervals and proof of timely oil changes in order to qualify for the extended warranty.

Oil sludge is the culprit. Sludge is oil that has turned to a thick, jelly-like consistency. Sludge can block passages in the engine, preventing oil from lubricating vital engine parts. Parts wear more quickly and may fail prematurely.

Sludge is caused by several factors. The first one is simply - time. The engine oil is contaminated by exhaust gas that eventually leads to sludge. That is where the recommendation to change your oil at least every three months comes from. Sludge can also come from oil that gets contaminated by water from normal condensation. A few minutes of driving at Texas freeway speeds allows the oil to heat up enough for the water to evaporate. The problem is we often run errands or take other short trips that don't allow the engine to warm up enough for the water to evaporate. This is especially true in winter. Sludge also forms when the engine gets too hot, causing the oil to breakdown. Stop and go summer driving, towing and hauling are all prime conditions for creating harmful sludge. And every engine has hot spots that create sludge.

Given all of these factors, estimating when to change your oil is pretty complicated. A couple of manufacturers have computer programs built into their vehicles that record the number of cold starts, how many times the cylinders fire, engine temperature and other factors. From that, the computer estimates when you should change your oil and flashes a warning. But what if you do not have a vehicle with this feature? How do you know when to change your oil? We're not sure you really can. Which is why it is better to be safe than sorry. 3,000 mi/5,000 km or three months - whichever comes first - talk with a service advisor at Kwik Kar Arlington Auto Service Centers in Arlington and see if that's a good recommendation for the way you drive.

The Fallacy of Cheap Tires

Do you ever shop for shoes in one of our Fort Worth area shoe stores?
When buying a running shoe, is quality important?
Does durability matter as long as the shoes look fabulous?
Would you rather have one pair of long lasting shoes or two pair of lower quality shoes at the same price?

Is the warranty important when buying tires?

When you choose new tires in Arlington, what's the most important factor for you?

Give us a call at Kwik Kar Arlington Auto Service Centers at Matlock @ 817-468-0200 & Sublett @ 817-563-1956 for tire recommendations.

You know, buying tires in Arlington is a big deal. It's a big ticket item so you know you'll be spending a lot. You're not only concerned about the price, but you want to know that it'll be a long time before you need to buy new tires again.

And of course there's the safety aspect as well. The tires do a lot of work – they carry the weight of the vehicle and you and your passengers. They need to be up to the task. You want to be sure they hold the road and provide good traction. If you carry heavy loads or tow a trailer, the tires need a high load rating to be up for the job.

As a tire professional, I think it's important that people understand the effect of price on a tire's performance and durability. When I was a kid, my dad had a saying. He said, "Pay twice as much and buy half as many".

Dad applied that to a lot of things. He thought that one high quality suit would last longer and look better than two cheap suits. The saying really seems to hold true when it comes to shoes and boots, too.

I buy high-quality work shoes because I spend a lot of time on my feet. They're more comfortable, have important safety features like steel toes and non-slip soles – and they last at least twice as long as cheap shoes. I feel I get very good value for my money.

I apply the same thinking to tires. The major tire brands that you're familiar with are known as Tier 1 tires. These tires are well-engineered and very high quality. Comparable tires are usually in the same price range from brand to brand.

Stepping down in price you come to private label tires. Some large tire store chains carry tires with the chain's own brand. It's important to know that most private label tires are built by the same Tier 1 brands that you are familiar with – so they are a quality product. You can ask your tire professional who makes their private brand.

The lowest priced tires on the market are Tier 3 tires. These tend to be imported from China or South America. Since you get what you pay for, you can't expect a Tier 3 tire to deliver the same performance and durability as the others.

So let's say you need new tires. You've determined the features you need. So you have several options, including price options. Now, you've probably heard the term 'it's a 40 thousand mile tire' or 'it's a 60 thousand mile tire'. Simply put, the manufacturer warrantees the tire for 'X' number of miles. If that's important to you, look for the warranty.

What's the difference in the tires with higher mileage warranties? It's the rubber compounds and the amount of tread material. As you might expect, you'll pay more for the longer-lasting tire.

Now the cheapest tires you can find won't have a manufacturer's mileage warranty or if it does, it'll be relatively low. That brings us back to dad's saying; if you buy the cheapest Tier 3 tire you can, you will likely go through two sets in the time it would take to wear out one set of good quality tires. And the good tires won't cost twice as much, so you'll end up paying more per mile driven with the cheap tires.

Hey, I realize that sometimes the budget will only allow for a Tier 3 tire. I make them available for my customers who need them because I would rather see them driving with safe, new tires than pushing their old tires beyond their safety limits. But I always counsel my customers to buy as much tire as they can afford, because it will be much less expensive in the long run.

Your tires are the only part of your vehicle that touch the road. You're only as safe as your tires are well built.

Buy value – not price.

Arlington Alignment Service

Your car might have an alignment problem if: it drifts or pulls to one side, your steering wheel is off center, you have uneven tire wear or your car doesn’t feel like it handles right. When all of a vehicle’s wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes, smacking a curb or other object are great ways to knock your car out of alignment. Then one or more of your wheels starts pulling in a slightly different direction and the problems begin.

Driving for an extended time when you're out of alignment causes your tires to wear unevenly and excessively. This can be dangerous and expensive. You'll have to replace your tires sooner, but even worse - you may cause premature wear to your suspension system, which can be really expensive.

The front wheel alignment is adjustable on all vehicles, and the back wheels are also adjustable on some cars. The adjustment can go three different ways. The first adjustment is called toe. The next adjustment is called camber. And finally, there is castor. The engineers who designed your vehicle determined the alignment settings that will give you the best handling and safety.

There are several things involved in an alignment check. First, there's an inspection of the steering and suspension - it should be checked to see if anything's bent or broken. Then the tire condition needs to be inspected. From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle's center line. If the back wheels aren't adjustable, a technician at Kwik Kar Arlington Auto Service Centers can determine the direction they push and then aligns the front wheels to match.

Kwik Kar Arlington Auto Service Centers
5333 Matlock Road & 4801 W. Sublett
Arlington, Texas Matlock @ 76018 & Sublett @ 76017
Matlock @ 817-468-0200 & Sublett @ 817-563-1956

Like most things, your manufacturer has suggested a mileage interval for having your alignment checked. But if you run into a curb, pothole or something else that's given you a big jolt, pay attention to whether your vehicle is pulling to one side when you drive. It's better to have your alignment checked before waiting to see if there is uneven tire tread wear - by then, the damage is done.

Getting your alignment checked when needed is a great way to extend the life of your tires and suspension parts. It also makes sure that your tire meets the road properly for maximum performance and safety.

On Board Diagnostics For Your sedan

Make an appointment with Kwik Kar Arlington Auto Service Centers to have your on board diagnostics analyzed.
5333 Matlock Road & 4801 W. Sublett
Arlington, Texas Matlock @ 76018 & Sublett @ 76017
Matlock @ 817-468-0200 & Sublett @ 817-563-1956

Today we're going to talk about on-board diagnostics and the questions we hear from folks around Arlington Texas who need answers about diagnostic services. They want to know what diagnostics are, what's involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Arlington Texas.

These are valid concerns. If you don't understand something it's really hard to know its value. Let's start with some history.

Since 1996, all cars and light trucks in Arlington Texas have been required to use a standardized diagnostic system to help repair technicians determine what's wrong with your vehicle. The diagnostic system works with the vehicle's Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can't adjust for, the computer will turn on the check engine light.

It is also called the 'service engine soon' light on some vehicles. The warning light signals you to get into your Arlington Texas service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you've searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what's wrong.

That's a common myth. The code itself doesn't tell you what's broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won't tell you what's wrong or how to fix it.

Let's say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You've confirmed a fever, but you don't know what's causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician's examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads 'Bank 1 sensor 1 circuit slow response'. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that's all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that's stored in the engine control computer. That history's very helpful in diagnosing the problem. Service centers like Kwik Kar Arlington Auto Service Centers invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don't need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Kwik Kar Arlington Auto Service Centers. If the light burns steady – don't panic. Get in to Kwik Kar Arlington Auto Service Centers soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

Keeping Your Arlington Air Fresh When Driving With A Clean Cabin Air Filter

What is a cabin air filter? Is it:

A. A filter for your Arlington house?
B. A fresh, piney scent?
C. A filter for the passenger compartment of your car?

Clever you, it’s C.

A cabin air filter cleans the outside air before it comes into the passenger compartment. It filters out common Arlington air particles like dust, pollen, spores, bacteria, pollutants, exhaust gas, odors and even sparrows.

These high tech filters can block particles larger than 3 microns. By contrast, a grain of sand is about 200 microns.

Not all vehicles in Arlington have cabin air filters. They are fairly new on the scene. About forty percent of new vehicles sold in Arlington come with cabin air filters, but the number is growing every year.

Cabin air filters can make for a very nice driving environment. Your car can be a haven during our Arlington allergy season with very little dust and pollen getting into the cabin. However, the filter eventually gets clogged. When this happens, your heating and air conditioning flow can become restricted. The filter can even get kind of smelly.

Check your owner’s manual for recommended replacement intervals. Often, the owner’s manual forgets about the cabin air filter, so ask your service technician at Kwik Kar Arlington Auto Service Centers for a recommendation. It’s usually every year or 12,000 miles / 19,000 kilometers. Change it sooner if you drive in dusty conditions around the Fort Worth area, or if you start to notice an odor from your ventilation system.

So keep your cabin air filter clean. It may not help with your brother-in-law in the backseat, but it will make your driving experience around Arlington more enjoyable.

Come by Kwik Kar Arlington Auto Service Centers and we'll take a look at your cabin air filter for you.

Timing Belt

Ever heard the sad tale of a staggering repair bill from a broken timing belt? Bad news. Let's take a lesson from their woes and remember to think about our timing belt.

First, let's review what a timing belt does. The top part of the engine, over the cylinders is called the cylinder head. The head contains the valves. There's at least one valve that lets the fresh air into the cylinder. This air, mixed with fuel, burns to create power. Then another valve or two open to allow the exhaust out of the engine. Each cylinder has 2 to 4 valves - that's 12 to 24 valves for a V-6, up to 32 values on a V-8. The opening and closing of the valves is done by a camshaft. The timing belt uses the rotation of the engine to drive the camshaft which opens and close the valves. It's called a timing belt because it has to be adjusted to rotate the camshaft to keep proper time with the engine so that everything's in sync.

The timing belt is a toothed rubber belt . But some cars use a timing chain or timing gears instead of a belt. Timing chains and gears are much more durable, but manufacturers are using belts more because they are quieter - and cheaper. If you have a small or mid-sized passenger car, crossover or mini-van, chances are you have a timing belt.

Unfortunately, timing belts fail without any warning. That shuts you down right away. A technician can inspect your timing belt and look for cracks and looseness. But getting to the belt to take a look can be almost as much work as changing it on some cars. That's why manufacturers recommend replacing the belt from time to time. For most vehicles it's from 60,000 to 90,000 miles or 95,000 to a 145,000 kilometers. If your owners' manual doesn't specify an interval ask your service advisor.

One AutoNetTV producer has had two timing belts fail. The first was while he was waiting at a stop light - that repair cost several thousand dollars. The second was while driving on the highway - that one cost more than twice as much. Both had the cars out in the shop for three weeks. His cars had what we call "interference engines", meaning that the valves and pistons are very close to each other. If the timing belt slips even one notch, the pistons will slam into the open valves. That's why our friend's highway failure was so much more expensive - his engine was traveling so fast that the valves were smashed and they chewed up the cylinder head.

A non-interference engine will just shut down if the timing belt breaks. You're stranded, but the engine doesn't suffer permanent damage. In both cases, our hapless friend was just a couple oil changes past the recommended interval for changing the timing belt. This is one of those things that you just cannot put off. Now replacing a timing belt is not cheap - but repairs for a broken belt can be many times as much.

Check your owners' manual right away - especially if you have more than a 60,000 miles or 95,000 kilometers. You may need to get that belt replaced right away. And on many cars, the timing belt drives the water pump. So, it may be a good idea to replace the water pump while you're at it because 90% of the work required for the new pump is already done with the belt change. Doing both at the same time saves you a lot of money because as they say, "timing's everything". Parts, Timing Belt

Fuel Filter Service in Arlington Texas

There are a surprising number of small, inexpensive parts that can lead to expensive engine damage when they fail. It doesn't seem right.

Fortunately a lot of those things can be taken care of in routine maintenance. They may not be easy to remember, because it is a long list, but your service center at Kwik Kar Arlington Auto Service Centers can help you know what's scheduled to be taken care of.

Some of us in Arlington Texas really don't look forward to going in for an oil change and then getting a list of the other things the manufacturer recommends.

But automotive maintenance is all about prevention, and addressing small problems before they get big. Let's take the fuel filter for example.

You may not know this but the median age for private vehicles on our Arlington Texas roads is over nine years. When cars get older, five years or so, they've accumulated a lot of dirt and rust in their gas tanks. If that dirt gets into the engine it can cause thousands of dollars worth of damage. So somewhere between that dirty gas tank and the price of a great vacation – is the lowly fuel filter: a very inexpensive part that doesn't cost too much to replace. And your car'll just run better too.

A clogged fuel filter can't let enough fuel through. You might notice at first that your car is running fine around town, but struggles or sputters on the Arlington Texas freeway or when you accelerate. Enough fuel can't get through to meet the demands of higher speed. If it gets bad enough your engine might just shut off or not start at all, which could be dangerous.

Some fuel filters have a bypass. When they get clogged, they allow dirty fuel to move around the filter element so dirt ends up in the engine. We've already talked about how expensive that can be.

The fuel filter is even very important for newer cars. The fuel is still dirty even if there isn't rust in the tank. It's just that the fuel filter will need to be changed more frequently as the vehicle gets older.

How often should you change your fuel filter? Check your owner's manual. Your Arlington Texas service advisor at Kwik Kar Arlington Auto Service Centers can tell you as well. It's usually around thirty thousand miles or so. Ask if it's time for a full fuel system cleaning as well. They often go hand in hand.

It's good to know that your Arlington Texas service center has your back. When you're motivated to maintain your vehicle's performance and to reduce operating costs, you'll think of Kwik Kar Arlington Auto Service Centers as your ally - and maybe even your memory.

Suspension Service At Kwik Kar Arlington Auto Service Centers

Suspension systems will continue to operate effectively for many years and tens of thousands of miles. Eventually sedan components do wear out, but how long that takes depends a lot on how you drive in Grand Prairie.

As you can imagine, if most of your driving is on smooth Texas highways, your shock absorbers will last a lot longer than if you do most of your driving on bumpy roads or hauling heavy loads. In addition to just wearing out, sedan suspension components can be damaged in an accident or by a hard impact – like a pothole, hitting a curb or a rock in the road. Because the life span of shocks can vary so widely, your sedan manufacturer recommends periodic inspections.

During an inspection at Kwik Kar Arlington Auto Service Centers, your honest Grand Prairie service technician will check for worn, broken or missing parts. Let me give a rundown of the major suspension components.

First there are the springs. The springs hold the weight of the vehicle. There are several kinds of springs. Springs are obviously heavy duty parts that rarely break or wear out. Shock absorbers work in conjunction with springs to smooth out the ride and help keep the tires on the road. The shocks are key to handling performance and ride comfort.

You’ve probably heard of struts. They combine a shock absorber and a coil spring in one unit. Shocks and struts will wear out over time. There are some signs that shocks or struts are wearing out. The tires may have a cupped wear pattern. This is from the shocks bouncing unevenly. You may notice a floaty or drifting sensation when cornering. If the front of your sedan dives excessively when stopping, or rocks back and forth after you stopped, your shocks may be worn out. And if they are leaking fluid, it’s definitely time to replace them.

If you are experiencing any of these symptoms, visit Kwik Kar Arlington Auto Service Centers for a suspension inspection. Same if you’ve been in an accident that involved one of your wheels. If your sedan suspension actually fails, it could lead to a serious accident, so take care of these things.

When you replace your shocks, it’s usually a good idea to replace all four at the same time. That’ll give you more even handling. Talk with your Kwik Kar Arlington Auto Service Centers service advisor because you don’t want a big difference between the performance of your shocks from wheel to wheel, and replacing all may be the safest bet.

There different grades of shocks and struts. You always want to use a replacement shock or strut that equals the one that came as original equipment when your sedan was new. But remember, they were designed to meet the expected needs of the broad range of Grand Prairie people who buy that particular vehicle. Your needs may be more specialized.

For example if you want increased handling performance for your sedan, your honest Kwik Kar Arlington Auto Service Centers advisor can recommend an upgraded shock or strut to give you what you want. If you haul heavy loads or trailers, you can get a more heavy duty shock absorber.

Search

Archive

Categories